DEFA Auto Security Car Alarm 800 Series Installation Manual
6 Instructions for the wiring diagram —Further information, see technical manual. P-1 Connection of Central Locking cf. page 6 P-2 Multiplug, Backup Alarm, Immobilizer Module … … and Pager (auxiliary equipment) This is the connection for auxiliary equipment such as the DEFA Backup Alarm, the DEFA Immobilizer Module or the Pager (Remote Alarm). Cf. separate assembly instructions. P-3.1 Current supply, red lead To be connected to a distributor via a 25A fuse (fuse box). P-3.2 Input, starter kill, red/black lead (only …
7 Door trigger 1, grey lead This input is normally open (NO) triggers the alarm when a contact to ground is made. Connect to the existing door switch circuit of the car. If the car has two separate circuits from the front and rear interior illumination, door trigger 2 (P-4.12) can be used for the rear doors, and input P-4.5 can be used for the front doors. P-4.6 Bonnet trigger, black/grey lead This input is normally open (NO) and triggers the alarm when connected to ground, i.e. when the bonnet is opened. Install DEFA Bonnet Switch. This should be installed in such a position as to make it inaccessible from either the underside or the front of the car. P-4.7 Light output 1, grey/red lead Connected directly to the right turn signal lamp circuit in the car. Maximum load: 7.5 amp. (90 watt). Fused with automatic circuit breaker. P-4.8 Siren Output to Siren. Connect the two Siren leads to P4.8 and P4.9. P-4.9 Siren Output to Siren. Connect the two Siren leads to P4.8 and P4.9. P-4.10 Ignition signal, white/brown lead Connect lead to ignition output of ignition switch. P-4.11 Luggage compartment trigger, white lead Connect to the normal luggage compartment switch if it is switched to ground. If it is switched to positive, a DEFA Polarity Inverter must be used. P-4.12 Door trigger 2, grey/white lead This input is normally open (NO), and triggers the alarm when contacted to ground This is an additional door switch input for NEGATIVE switches and is used particularly when there are separate circuits for the front and rear doors. P-4.13 DEFAnet This output can control DEFA Power Module.
Download Installation Manual, DEFA Auto Security Car Alarm 800 Series.Pdf